Windows Recovery Software- Recover Files from RAW Recovery

The file system is the main component of any operating system. It is responsible for managing files and directories on the hard disk. It is very prone to failure and can do all the hard disk partitions invisible and inaccessible. At the same time, the computer may be unbootable and all the data are not available. When it was damaged, and file becomes RAW. In these cases, you should go for solutions Windows recovery to recover lost or inaccessible hard drive partition.

In a practical situation when you try to repair a raw disk with Chkdsk command-line tool. It complains that it is unable to perform the recovery of RAW files. It can give you the following error message:

"Type of file system is RAW.

CHKDSK is not available for RAW drives. "

The RAW hard drive partition that is formatted with the FAT (File Allocation Table) or NTFS (New Technology File System). RAW file is a system, if the file is executed, which is ultimately all the input / output system files need system file support. When I / O manager calls the active file system to mount a disk volume, the system of RAW file is always called last, supports all types of disk and tape media.

Once the file is corrupted, the file must be RAW and Windows does not recognize the file system RAW. Therefore, it cannot find the stored data and use it. This behavior must be taken seriously situations of loss of the partition and Windows recovery is to eliminate this problem.

The file system corruption can occur due to a number of reasons such as infection, improper system shutdown, power outages, without upgrading the operating system and so on. In such cases, come Windows Recovery Software to recover lost Windows partitions and stored data.

These programs are specifically designed to methodically analyze your entire hard drive using effective mechanisms to scan and recover lost partitions and data. With an interactive user interface and simple graphics, this software is very easy to use and does not require strong technical skills and advance knowledge. Windows Data Recovery Software cannot write anything on the hard drive because of read-only behavior.

Windows Data Recovery is the most complete solution for dealing efficiently partition loss scenarios. It will restore FAT32, VFAT, NTFS and NTFS5 partition files. To restore the raw partition, simply download the program called Stellar Phoenix Windows Data Recovery.

Windows Recovery Software - Restore Your Windows-formatted Files in Windows System

While formatting Windows, you can lose data. You must try the best way to recover data lost after formatting the Windows operating system. In general, when you format the hard drive is new, or when you try to install the operating system or when the system is corrupted or infected with the virus. Let me be clear: first, the recovery of lost data due to formatting the hard drive is still recoverable until new data is written in it. Second, the data lost due to one of the reasons may be recovered.

When you format a hard drive system files required for data storage is the responsibility of a hard disk. The file system creates data tables and other components necessary for data manipulation.

Is formatting necessary?

Operating system corruption, lack of the Windows boot files, the files infected by the virus, install new software, or if you want to upgrade the operating system has a few scenarios where you want your system to deal with issues. One way to do this is to reinstall the operating system or formatting the hard drive. If you are installing the system design after the same position, you can run into a loss of data. But the process can lead to format the drive if you accidentally select this option. This can cause loss of data on the hard drive. But as pointed out in advance by using Windows Recovery Software, you can download all the lost data.

Recover Lost Files When Formatting

You need good Windows data recovery software to recover data lost or damaged. Connect the hard drive from which data should be retrieved as a slave to another hard drive. Let this be a transmission system according to the primary hard drive. Install the Windows Recovery software priorities. Follow the step by step instructions to restore the lost data.

Do not restart the computer or install new software on the hard disk where you lost your data. This leads to a written record for the past, and cause data loss. At all times, use reliable Windows data recovery software to recover lost data. Estimate the demo, explore options, and analyze the comments on this product, contact the customer service of the software has some way to verify the reliability of software.

Overcoming partition corruption due to 'BAD_POOL_HEADER' error in Windows 7

Data security is the most important requisite of a reliable Windows operating system. Despite of having an updated version of Windows each time, we have become accustomed to receiving various BSODs ( Blue Screen Of Death) on our computer screens. These BSOD or STOP errors indicate serious start up problems that your computer might be facing. They are generally caused by driver problems, hard ware errors, outdated BIOS configuration, and corrupt start up files. In such cases, the computer freezes and reboots unexpectedly. In addition to losing all the unsaved partition data, sometimes it may render your system completely unbootable. In such circumstances, you should go for Windows recovery through a reliable third party utility.

For instance, when you start your Windows 7-based computer, you may come across the following STOP error message:

“BAD_POOL_HEADER”  

Cause:

This error generally occurs due to an incorrect memory allocation by Windows 7. The possible reasons are-

·         Bad system drivers

·         NTFS file system may be corrupt

·         Issue with any anti-virus program service

Corrupt NTFS file system will make all the partitions inaccessible. To restore or recover Windows partition data, you can use an updated backup. If your backup is not up-to-date, you should follow the below given steps.

Resolution:

These steps may help you resolve the issue-

·         Boot the system using the 'Safe Mode' option and use the 'System Restore' feature to restore the system to a previous restore point.

·         Install the latest Windows 7 service pack on your computer.

·         You should get the latest drivers for any recently installed system hardware.

·         Disable the Microsoft's indexing service as it might cause conflicts with the drivers.

If these resolution steps fail to solve your problem, you should take help of efficient Windows recovery software. This software can help you easily recover all the lost files, documents, emails, photos, music, videos etc. from the corrupt or inaccessible partitions. You can take advantage of their highly interactive user interface to quickly acquaint yourself with all the significant features of the software. 

'Event ID 55' occurs due to damage in the hard drive partition or its file system

Is your Windows 7 based computer encountering 'Event ID 55' error message? Is the hard drive unreadable and unusable due to corrupt file system structure? This a pure case of data loss, thereby renders your system totally inaccessible. The factors that leads to such a situation can be listed as sluggish operating system, missing/corrupt system data structures, or hard drive logical structure errors. You find such erroneous condition generally in NTFS file system partitions that further results in serious partition loss situations. In such condition, if you have a proper backup, you can recover you data from the backup. But in absence of a proper backup, you need Windows data recovery software to recover the damaged hard drive partition and the lost data.

Such an error in the system is communicated through error messages that read:

“Event Type: Error

Event Source: NTFS

Event ID: 55 

Description:

The file system structure on disk is corrupt and unusable. Please run the chkdsk utility on the volume ”

If you try to solve the problem by running  Chkdsk.exe utility, the process gets interrupted in the half way. This further leads to un-usability of the hard drive resulting in severe data loss.

Causes  of the occurrence of 'Event ID 55' in Microsoft Windows 7:

The above problem may occur if the Windows hard drive partition or its file system is damaged. The following reasons are the prime cause of the corruption:

·         The Windows hard drive has damaged data structures

·         Incomplete Input/Output requests, that are issued by file system to hard disk subsystem

Resolution:

In order to fix this problem, perform the following methods:

·         Type chkntfs at command prompt. If you get another message “drive is dirty”, run chkdsk utility.

·         Try to run the Chkdsk.exe utility manually so as to check integrity and consistency the Windows hard drive

·         If the above processes fails, to make the drive functional you can format it and reinstall the operating system

However, reinstalling the operating system leads to wiping out of the data saved on in it. However, to successfully recover your lost data you can use Windows Recovery software. The application thoroughly scans the entire hard drive and recover lost data from the hard drive.

Stellar Phoenix Windows Data Recovery software that can recover the lost and damaged data resulting from the above described reasons. The software recovers lost/deleted data and also data lost due to formatting or corruption of partitions or storage media. It also recovers data from lost, formatted FAT, NTFS, and exFAT file systems.